新聞資訊
聯系我們

濟南富強門業有限公司
聯系人:林經理
電話:151 6888 2846
郵箱:527800164@qq.com
地址:濟南市歷下區化纖廠路8號3號樓101號
車庫電動門落不到底怎樣調整
來源:http:// 日期:2022-10-22 發布人:
車庫電動門落不到地,濟南卷簾門廠家認為可以通過以下幾步進行車庫電動門不落地的調整:找到控制板的FUNC按鍵,按下INC按鍵,根據指示燈進行調試限位。具體內容如下:
The garage electric door cannot fall to the ground. The Jinan roller shutter door manufacturer thinks that the adjustment of the garage electric door can be carried out through the following steps: find the FUNC button on the control board, press the INC button, and debug the limit according to the indicator light. The details are as follows:
一、先找到控制板的FUNC鍵先先在控制板上按下FUNC鍵之后,假如看到有指示燈閃爍,我們?cè)俅伟碏UNC鍵,按的時間超過八秒,這樣指示燈才會完全變亮,這個時候才是進入車庫門的調試階段。
1、 First find the FUNC key of the control board. First press the FUNC key on the control board. If the indicator light flashes, we press the FUNC key again for more than eight seconds, so that the indicator light will be completely lit. This is the time to enter the debugging phase of the garage door.
二、后按下INC鍵按下INC鍵,這個時候電機就會向開門的方向運行,然后繼續按住這個鍵不放,待到它到合適的位置之后,我們松開按鍵;操作完成之后按下DEC鍵。
2、 Then press the INC key and press the INC key. At this time, the motor will move towards the door opening direction, and then continue to press and hold the key until it reaches the appropriate position, we release the key; Press DEC key after operation.


三、隨后根據指示燈上面的步驟完成之后,我們?cè)诎磩?dòng)FUNC鍵,指示燈這個時候會不停閃爍,,等到指示燈再次亮了之后就可以進行下限位調試。
3、 After the above steps of the indicator light are completed, we press the FUNC key, and the indicator light will flash continuously at this time. After the indicator light is on again, we can debug the lower limit.
四、調試限位下限位調試其實與上面步驟是差不多的,等到完成之后,就可以按動FUNC鍵,一直等到閃爍燈出現閃爍的時候,就說明我們的下限位調試已經完成了。
4、 In fact, the lower limit debugging of the debugging limit is similar to the above steps. When it is finished, you can press the FUNC key until the flashing light flashes, indicating that our lower limit debugging has been completed.
車庫電動門落不到底怎樣調整?以上從幾個方面來講解了問題的內容,您對此有什么想法可以隨時來我們這里http://分享交流,找到更好的應對的方法。
How to adjust the electric door of the garage? The above explains the content of the problem from several aspects. You can come to us anytime if you have any ideas about it http:// Share and communicate to find a better way to cope.
閱讀/ Recommended reading
- 車庫卷簾門彈簧問題的維修指南 2025-02-22
- 翻板車庫門和卷簾車庫門有什么不同 2025-02-11
- 剖析翻板車庫門和卷簾車庫門有什么不同點 2025-02-01
- 防火卷簾門的面積核算方式及裝置要求 2025-02-14
- 濟南卷簾門限位器壞了還能修理嗎? 2025-02-03
- 每一扇卷簾門,都是品質與工藝的結晶 2025-01-27
- 電動卷簾門限位調整需要注意什么 2025-01-07
- 濟南卷簾門的工作原理及安裝維修 2024-12-18
濟南卷簾門遙控器的配對方法
2025-02-25
卷簾門遙控器的配對方法因類型不同而有所差異,以下是常見的幾種配對方式:The pairing methods for remote control of rolling shutt...