現在卷簾門的應用非常廣泛，隨處可見，當然不一樣，如何保養卷簾門才能提高使用壽命，濟南卷簾門廠家濟南永誠卷簾門來分享帶你了解好的保養方法。

Now the roller shutter door is widely used and can be seen everywhere. Of course, the price is different. How to maintain the roller shutter door can improve its service life. Jinan roller shutter door manufacturer Jinan Yongcheng roller shutter door will share with you the good maintenance methods.

卷簾門如果長期不用，很容易造成灰塵堆積，影響卷簾的美觀，所以通常需要多拉動卷簾。在日常使用中，一定要嚴格按照卷簾的使用方法進行操作，不要用力拉扯，以免損壞卷簾門。

If the rolling shutter door is not used for a long time, it is easy to cause dust accumulation and affect the beauty of the rolling shutter, so it is usually necessary to pull the rolling shutter more. In daily use, the operation must be carried out in strict accordance with the use method of the roller shutter, and do not pull hard to avoid damaging the roller shutter door.

濟南卷簾門電機的保養周期為半年，減速機構應少每六個月加一次潤滑油。此外，應定期檢查電機各部件，及時更換。定期檢查氣囊，確保其不受外力損壞。

The maintenance cycle of Jinan roller shutter motor is half a year, and the reducer should add lubricating oil at least once every six months. In addition, all parts of the motor shall be inspected regularly and replaced in time. Check the airbag regularly to ensure that it is not damaged by external forces.

否則，如果氣囊泄漏，將失去其維修功能。扭簧使用一段時間后，應檢查其是否仍能正常工作。如有松動，應及時擰緊或更換。在門使用過程中，應盡量防止卷簾門的其他部位受到外力的碰撞。

Otherwise, if the airbag leaks, its maintenance function will be lost. After the torsion spring is used for a period of time, check whether it can still work normally. If it is loose, it shall be tightened or replaced in time. During the use of the door, try to prevent other parts of the rolling shutter door from being collided by external forces.

定期用雞毛撣子對百葉窗進行除塵。同時，用一根細棒，一端起毛，插入，繼續旋轉以去除灰塵。不要使用酸性清潔劑，防止卷簾門表面腐蝕，盡量不要用濕手打開門鎖。

Dust the shutters regularly with a feather duster. At the same time, use a thin rod with one end roughened, inserted and continued to rotate to remove dust. Do not use acid cleaner to prevent the surface corrosion of rolling shutter door. Try not to open the door lock with wet hands.

所有電控卷簾門的開閉方向應與開關盒方向一致，特別是在試運行時重新接通電源或外接輸入電源相線時，濟南卷簾門電機需要用手動裝置進行維修，將卷簾門放入門孔中。在1/2高度，打開電源后嘗試打開和關閉百葉窗。在附加到指令之前它工作正常。否則蓋子會損壞，卷簾會回滾或沖洗頂部導致泄漏。

The opening and closing direction of all electric control rolling shutter doors shall be consistent with the direction of the switch box, especially when the power supply is reconnected or the external input power phase line is connected during the test run, the Jinan rolling shutter door motor needs to be repaired with a manual device, and the rolling shutter door shall be put into the door hole. At 1 / 2 height, try to open and close the shutter after turning on the power. It works properly until it is attached to the instruction. Otherwise, the cover will be damaged and the roller shutter will roll back or flush the top, resulting in leakage.

卷簾門維修時，操作人員應站在能看到卷簾門運行狀態的位置，否則可能發生事故和損壞。卷簾門和卷簾門機嚴禁與酸堿溶液接觸，以免腐蝕門簾表面。

During the maintenance of the rolling shutter door, the operator should stand at the position where the running state of the rolling shutter door can be seen, otherwise accidents and damage may occur. The rolling shutter door and rolling shutter door machine are strictly prohibited from contacting with acid-base solution to avoid corroding the surface of the door curtain.

卷簾門機應定期（少每年兩次）檢查卷簾門的運行、滑動、傳動等部位，并根據需要及時加油，以保證卷簾門的正常使用。

The rolling shutter door machine shall regularly (at least twice a year) check the operation, sliding, transmission and other parts of the rolling shutter door, and timely refuel as needed to ensure the normal use of the rolling shutter door.

在日常使用中要注意以上幾點，只要保養方法得當，可以大程度延長卷簾門的使用壽命。更多相關內容就來網站咨詢吧！

Pay attention to the above points in daily use. As long as the maintenance method is appropriate, the service life of the rolling shutter door can be extended to a great extent. For more information, please visit Com consultation!