The development of roller shutter door in China has been quite mature. Both enterprise garage and personal garage are widely used, and the safety measures of fire prevention and anti-theft are also very perfect. Ji "the market demand of South rolling shutter door is also very large. Many consumers buy rolling shutter door manufacturers to measure, and return to the manufacturers after measurement. This undoubtedly increases the process and wastes a lot of time. Today, Jinan rolling shutter door manufacturers explain to you five points for attention of consumers' self measurement:

　　1.雙面直角墻。測量師應主動征求客戶對濟南卷材門的意見，結果:一是客戶選擇保留左右線，均勻美觀，測量師可采取減小目標尺寸120mm，即能達到上述目標;二是客戶選擇的目標尺寸不變，安裝工人依靠兩側直角墻的線切割小到合適。

　　1. Double sided right angle wall. The surveyors should take the initiative to ask the customers for their opinions on Jinan coiled material door. The results are as follows: first, the customers choose to keep the left and right lines, which are even and beautiful. The surveyors can reduce the target size by 120mm, which can achieve the above goals; second, the target size chosen by the customers remains unchanged, and the installation workers rely on the line cutting of the two side right angle walls to be small to appropriate.

　　2.上墻的直角。計量應主動征求濟南卷簾門客戶意見，是客戶選擇保留線條，均勻美觀，計量可采取減少(低)目標尺寸60mm，即能達到上述目標;二是客戶選擇目標尺寸不變，安裝工人把線剪到合適。

　　2. Right angle to the wall. The measurement should actively seek the opinions of Jinan roller shutter door customers. First, the customers choose to keep the line, which is even and beautiful. The measurement can reduce (low) the target size by 60mm, that is to say, the above goals can be achieved. Second, the customers choose the target size unchanged, and the installation workers cut the line appropriately.

　　3.地板上。由于客戶的實際情況差別很大，一般分為三種:種是已經鋪好了的地板，用測量的方法可以測量;二是未鋪砌的地面，高度應減小尺寸:A、地磚:大理石、瓷磚統一減小50mm;B.瓷磚木地板、復合地板、實木地板減少30mm;C、骨架木地板以骨架為骨架，實際地板厚度增加10mm。

　　3. On the floor. As the actual situation of customers is quite different, it is generally divided into three types: the first one is the paved floor, which can be measured by the measurement method; the second one is the unpaved floor, whose height should be reduced by size: A. floor tiles: marble and ceramic tiles are reduced by 50mm; B. ceramic tile wood floor, composite floor and solid wood floor are reduced by 30mm; C. The skeleton wood floor takes the skeleton as the skeleton, and the actual floor thickness increases by 10 mm.

　　4.左右墻面和上墻面墻面的垂直度和坡度。測量員應該小心選擇zui點作為目標尺寸。

　　4. Perpendicularity and gradient of left and right walls and upper walls. The surveyor should carefully select Zui point as the target size.

　　5.單一的矩形。測量師應主動征求客戶的意見，結果如下:，客戶選擇保留左右兩邊的線條，統一美觀。驗船師和客戶建議將目標尺寸減少60mm，以實現保留線條的愿望。第二,客戶選擇目標大小不變(客戶請求門的門有點大),必須與客戶解釋,依賴于直角墻框架邊緣線安裝切小,直到適當?shù)?是左右不對稱行)的影響。

　　5. Single rectangle. Surveyors should take the initiative to ask customers for their opinions. The results are as follows: first of all, customers choose to keep the lines on the left and right sides, unified and beautiful. Surveyors and customers recommend reducing the target size by 60mm to achieve the desire to retain the line. Second, the size of the target selected by the customer remains the same (the door requested by the customer is a little large), which must be explained to the customer, and it depends on the installation of the right angle wall frame edge line to be cut down until the impact of the appropriate (left and right asymmetric lines).

　　只要消費者記住上面的5分的關注,可以簡便測量的大小需要安裝百葉窗大小,所以你可以直接與濟南卷簾門制造商溝通,幫助你節約時間,快速安裝可靠和實用的百葉窗!

　　As long as consumers remember the above 5 points of concern, the size that can be easily measured needs to be installed with louvers, so you can directly communicate with the manufacturer of Jinan roller shutter door to help you save time and quickly install reliable and practical louvers!