防火卷簾門的安裝施工技術

　　Installation and construction technology of fireproof rolling shutter doors

　　施工準備

　　Construction preparation

　　熟悉施工圖紙和技術規范，了解防火卷簾門的安裝要求和技術參數。

　　Familiar with construction drawings and technical specifications, understand the installation requirements and technical parameters of fireproof rolling shutter doors.

　　準備好施工所需的材料和設備，包括簾片、導軌、電機、控制箱等。

　　Prepare the materials and equipment required for construction, including curtains, guide rails, motors, control boxes, etc.

　　對施工現場進行清理和檢查，確保施工條件符合要求。

　　Clean and inspect the construction site to ensure that the construction conditions meet the requirements.

　　測量放線

　　Measurement and laying out

　　根據施工圖紙，在建筑結構上確定防火卷簾門的安裝位置，并進行測量放線。

　　According to the construction drawings, determine the installation position of the fireproof rolling shutter door on the building structure and conduct measurement and layout.

　　確定導軌的安裝位置和標高，保證導軌的垂直度和平整度。

　　Determine the installation position and elevation of the guide rail to ensure its verticality and flatness.

　　安裝導軌

　　Install the guide rail

　　將導軌固定在建筑結構上，使用膨脹螺栓或焊接等方式進行固定。

　　Fix the guide rail to the building structure using expansion bolts or welding.

　　調整導軌的垂直度和平整度，確保簾片在升降過程中不會出現卡滯現象。

　　Adjust the verticality and flatness of the guide rail to ensure that the curtain does not get stuck during the lifting process.

　　安裝卷軸

　　Install the scroll

　　將卷軸安裝在卷簾箱內，調整卷軸的水平度和垂直度。

　　Install the scroll inside the rolling shutter box and adjust the levelness and verticality of the scroll.

　　安裝傳動裝置，將電機與卷軸連接起來，確保傳動裝置的可靠性。

　　Install the transmission device and connect the motor to the reel to ensure the reliability of the transmission device.

　　安裝簾片

　　Install the curtain panel

　　將簾片逐片安裝在卷軸上，注意簾片的排列順序和方向。

　　Install the curtain pieces piece by piece onto the scroll, paying attention to the arrangement order and direction of the curtain pieces.

　　調整簾片的間隙，保證簾片之間的密封性。

　　Adjust the gap between the curtains to ensure the sealing between them.

　　安裝控制箱

　　Install control box

　　將控制箱安裝在便于操作和維護的位置，連接好電源和控制線。

　　Install the control box in a location that is easy to operate and maintain, and connect the power and control wires.

　　對控制箱進行調試，確保其功能正常。

　　Debug the control box to ensure its proper functioning.

　　調試和驗收

　　Debugging and acceptance

　　對防火卷簾門進行調試，檢查其升降速度、限位開關、手動操作等功能是否正常。

　　Debug the fireproof rolling shutter door and check whether its lifting speed, limit switch, manual operation and other functions are normal.

　　進行防火性能測試，確保防火卷簾門在火災發生時能夠有效地阻止火勢蔓延。

　　Conduct fire performance testing to ensure that fire-resistant rolling shutter doors can effectively prevent the spread of fire in the event of a fire.

　　組織相關部門進行驗收，驗收合格后，方可投入使用。

　　Organize relevant departments to conduct acceptance, and only after passing the acceptance can it be put into use.

　　本文由 濟南卷簾門廠  友情奉獻.更多有關的知識請點擊   http://m.bankrobot.cn  真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Door Factory For more related knowledge, please click http://m.bankrobot.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.